Main Application:
The machine is suitable for drying the material in pharmaceutical
chemical food stuffelastic gumelectronical industries de-watering
vegetable, particle feed, gourmet powder, shredded coconut
stuffing, organic color, compound rubber, acryl fibre, medicine
product, medicine material, smallwooden product, plastic product,
aging and solidification for the electronic component and device.
Working Principle:
The materials are uniformly put on the mesh-belt by the material
charger.The mesh-belt uses generally 12-60 mesh stainless steel
wire net and it is drawn and moved inside the direr by a
transmission device.The drier is composed of several units,the hot
air is circulated separately.Some exhausted gas is discharged with
a special moisture elimination blower.The waste gas is controlled
through an adjustment valve.The hot air passes through the
mesh-belt covered with the material from the top to the bottom or
from the bottom to the top and this will complete the heat and mass
transfer process.
This process will bring will fall into the material collector
continuously.The top and low circulation units can be freely
equipped according to the users'demand.The unit number can be
selected according to be demand.
Features:
This machine is flowing and continuous type drying equipment
firstly made by our factory. The machine is used for drying the
piece,tape and particle state materials with good ventilation. The
machine is suitable for the materials, such as de-watering
de-watering vegetable,herbal medicine of traditional Chinese
medicine and others,for which the water content rate is high and
the high temperature is not allowed. The machine owns the
advantages,that its drying speed is fast,the evaporation strength
is high and the product quality is good.The de-watering filtering
cake state paste material,after the particle makeing or bar
making,can be dried also. | | 1.Inlet air blower | 2.circulation air blower | 3.steam heater | 4.Transmission belt | 5.exhaust blower | 6.material hopper |
Model | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 | unit number | 4 | 5 | 4 | 5 | 4 | 5 | belt width m | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 | drying section length mm | 8 | 10 | 8 | 10 | 8 | 10 | thickness of the material to be covered mm | 10-80 | temperature | 60-130 | steam pressurenbsp Mpa | 0.2-0.8 | steam consumption Kg/h | 120-300 | 150-375 | 150-375 | 170-740 | 180-500 | 225-600 | drying time h | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | drying strength Kg H2O/h | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 | total power of the blower Kw | 9.9 | 12.1 | 9.9 | 12.1 | 18.2 | 22.2 | total power of the equipment Kw | 11.4 | 13.6 | 11.4 | 13.6 | 19.7 | 23. |
|
